| My professional interests |
|
Computing Law Education Science and research |
| My leisure interests |
|
Martial arts Heritage railways Garden railways Motorcycles DIY |
| Downloads |
|
Linux downloads Windows downloads Java downloads Perl downloads Home automation downloads |
| About me |
|
Home & family My CV |
| Site info |
|
Contact the author Download policy Keyword index |
Nearly there now
Once the porch was watertight and there was a temporary floor in place, I could relax a bit, because most the rest of the work could be done even if it poured with freezing rain every day (which it did). The interior fitting was pretty routine. The first job was to replace the existing exterior light -- a pretty feeble affair -- with a huge, bright, one up in the roof. Not only would that make the porch more practical in use, it would allow to work when it was dark (and it gets dark by about 4pm in November). The porch is dry-lined with plasterboard mounted on relatively thin studs, to avoid reducing the interior size any more than necessary. Quite a lot of the plasterboard went to waste, because they boards were an inconvenient size compared to the size of the walls. But, happily, pasterboard is inexpensive. I fastened the boards to the studs using screws, rather than nails, so that I could screw them down below the level of the plaster. I did consider putting a thin skim of real plaster over the wallboards -- usually this is necessary -- but once I'd filled the screw holes and the gaps between the boards the finish looked pretty good already, so I didn't bother.The walls are finished in washable, waterproof emulsion. This is expensive, but I've learned that any place where children take off their shows very rapidly ends up covered in mud, and I didn't fancy painting the porch again any time soon. So I think this was money well spent.
Finishing touches
Then it's just a case of installing the skirting board, interior window cill, and wooden trim around the door and window, and at the top edge of the wallboards which would otherwise be exposed. This is a straightforward, but unexciting, job. I also made custom shelving to store boxes of hats and scarves, etc., and mount the coathooks, and a big wooden bench to sit on and store shoes in. But that's not really part of the construction job, so I won't bore you with the details.
|
| Everything neat and tidy... so far |
Approximate costs
| Flourescent lamp and electrical parts | £100 |
| Stud battens | £40 |
| Wallboards | £30 |
| Door and window trim | £20 |
| Skirting board | £20 |
| Plasterboard sealant | £20 (ouch!) |
| Washable emulsion pain | £20 |
| Screws, nails, filler, and sundries | £20 |
| Planed timber for fitted shelving | £20 |
| Brassware (coat hooks, etc) | £20 |
| Screws, nails, filler, and sundries | £20 |
|
|
|
| Total | £330 |
| Search |
| Shameless plug |
 By the author of this site. Buy on-line from Amazon USA | UK |
| Editorial |
So you want to be a university lecturer? Read this first! Speak like your boss: new developments in managerese |
| Computing features |
|
File handling in the Linux kernel: an in-depth look at how Linux handles files, filesystems, and file I/O
All sorts of Linux stuff Confused about CLASSPATH? answers are here First steps in EJB using jBoss (recently revised for jBoss 3.2) |